Micros Systems PCWS 2015, Руководство по установке

Страница: 19 / 178

PCWS 2015 Setup Guide - 2nd Edition 1-7
What is the PCWS 2015
Features
Features
This section discusses the standard IO capabilities and expansion options
available for the PCWS 2015.
Expansion Capabilities
This section lists both IO Panel and system board expansion connectors.
Serial Ports
The PCWS 2015 features a total of 4 serial ports, configured in the following
manner.
2 DB9 Serial Ports, COM1 and COM2.
• COM1 offers BIOS sele5V, +9V and +24V outputs.
• COM2 is a non-powered DB9 serial port.
COM4 IDN Port. RJ45 Modular Connector combines an RS422/RS232
Interface. This port can be used for IDN printers, serial printers or other serial
peripherals.
COM5 Modular RS232 Port. RJ45 ‘full-featured’ RS232 interface supports a
number of peripherals and interfaces.
USB Ports
The PCWS 2015 features a wide selection of available external USB ports on
the IO Panel and internal headers located on the system board.
Type A USB Ports
A total of four Type A USB connectors (USB1 - USB4) are available at the
IO Panel for general purpose use. With the addition of the USB Extension
Cable option one USB port can be made available at the front of the
optional Adjustable Stand.
Powered USB Ports
The PCWS 2015 IO panel includes two unique powered USB ports. Unlike
standard powered USB, these ports are not constrained to a single voltage
and are smaller than traditional powered USB ports.
The port voltage is determined by the dongle connected to it. One port can
provide 5V, +12V, or +24V; the second port can provide 5V
or +12V.
Typical uses for these ports are powered USB peripheral such as the
Protege Display System. MICROS has tested the Epson TM-T88V
Powered USB Printer on port USB5. This implementation is shown on the
next page.