86 Printer Operation and Menu Functions
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s
Manual
MICROPLEX iF60C
Edition 1.0
4.7. Changing the Tear Position
Tear mode is on at normal mode and off at continuous mode.
Tear position indicates the distance between the tear unit and the cutter.
The value is adjustable, the standard value is 57 mm.
1.
On the operation panel, push [SETTINGS AND MAINTENANCE].
2.
Select [SETTINGS].
3.
Select [SETTINGS].
4.
Select [TEAR MODE].
SubMenu SETTINGS\TEAR MODE:
