Installation 15
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX Operator’s
Manual
MICROPLEX iF60C
Edition 1.0
Power standards:
- Please connect the power plug to
100 - 240 V AC, 50/60 Hz
- The power source must be properly grounded.
- The socket and power cords must not be damaged.
- The effective power input is appr. 155 W.
- Use the printer only within the allowable fluctuation range +10%
of the power voltage.
!
Do not open any door or cover of the printer while the device is
printing. During print operations it is not allowed to turn OFF the
main switch.
Open and close the inner clamshell only when necessary.
Please switch off your printer immediately and unplug the power
cord from the wall socket if you see smoke rising from your
printer. The same steps are necessary, of course, if you notice
an acrid smell coming from your printer or if you see any sparks
being emitted from your printer.
Please keep the printer powered off in times when you are not
using it. If the printer will not be used over an extended period
of time (e.g. a couple of weeks), the printhead has to be
uninstalled and the two revolver caps should be installed in the
printer (to reach conditions compareable to the time before first
installation). Afterwards, please turn off the printer.
Please note:
The uninstalled printhead should be placed back to its protective
cover immediately. Well-sealed in its original package the
printhead will be kept moist and this will prevent the printhead
from nozzle blocking.
Do not switch off the printer if any of your ink tanks has been
removed. Failure to do so may cause ink delivery problems in
your printer.
Moving: If you need to transport the printer over a long
distance, please consult your service engineer. (Compare
chapter 7 Measures for Transport and Shipping.)
