Included in Kit
* Pre-cut Depron parts
* Control horns
* Motor mount sssembly
* 7mm geardrive with motor and 140mm propeller
* Extension leads for motor
* Plastic wheel assembly
* Carbon rods for wheel strut bracing and pushrods
* Wire for making control linkages
* Heat Shrink for connecting control linkages to pushrods
* Sand paper
* VELCRO® Brand adhesive dots.
Additional Items You Will Need
* UHU Por Foam glue or other foam safe glue (
* Hobby knife
* Araldite (Epoxy) glue
* Your own receiver, battery, charger and connectors
* A programmable transmitter which has channel reversing options
* Small drill set
* A pair of small hobby long tip pliter
Overview:
The Depron Ezee Flyer is a classic design slow
flyer perfect for indoor flight or outside on very
calm days. The wing design provides for ample lift
and steady slow flight while maintaining
manoeuvrability at slow speeds. The kit is
provided as an airframe only kit allowing you to
incorporate your own receiver and servos or
receiver brick setup.
Skill Level:
This design is suitable for everyone from
beginners to advanced builders and can the
airframe itself can easily be completed in just a
few hours. You will however, need some
experience in setting up RC receivers, as well as
soldering skills to complete the radio gear
installation.
