Glue the undercarriage supports and
wheel hubs into the wheel struts as
shown here
Slide the wheels onto the axels as shown
here. Then cut a V shape into the wheel
cover pieces and glue them to the axels.
Be careful not to get any glue on the axel
near the wheel. Place some pins through
both the covers and the back piece to
hold the covers in place as the glue dries.
OPTIONAL
You may wish to use some scrap pieces of
Depron foam to make top covers for the
wheels as shown here. Use more pins to
hold them in place as they dry.
Cut away a small part of the edge of the
foam near where the control surfaces
hinge to allow them to swing more to
that side.
