MicronWings Balsa Craft Cub, Инструкции по сборке

Страница: 12 / 16

The motor is supplied with no connector.
Depending on your choice of receiver you may
wish to solder the wires directly to the receiver
board or attach a connector which matches the
one on your receiver. See the connectors section
on our website for various options.
Link to Connectors page on MicronWings
With the receiver all wired up you can now screw
the mounting board in place.
The battery can be mounted directly under the
receiver board.
The kit is supplied with two types of control linkage connectors and you may choose which ones
you want to use. The wooden type on the left screwed into the servo arms. However we suggest
you use the linkages shown on the right which are a more reliable way to set up your control
system. The kit is also supplied with two carbon pushrods.
Battery Info: We recommend a 130mah battery such as the
one below. These are available on the MicronWings website
for postage within Australia only.
Product Link