Interface
USB device, USB host and LAN (1000BASE-T) are equipped as stan
-
dard interfaces.
Other functions
(2) Load operation
Either one list data of sweep or FSK/PSK/IQ modulation, and one setting
parameter are allowed to load.
Front panel
Rear panel
USB A
socket
USB A
socket
USB B
socket
LAN
socket
USB flash drive
Using USB A socket (host) on the front panel, data such as list sweep
data, FSK/PSK modulation signal data, list data of optional IQ modulator
and setting parameters can be saved and loaded.
Save/Load
(1) Save operation
Each 10 list data for sweep and FSK/PSK/IQ modulation, and 200
setting parameters can be saved.
USB A socket (front panel) A USB flash drive is inserted.
USB B socket
Used to communicate with a PC. The
transfer rate is 12Mbps (full speed).
USB A socket (rear panel)
When using LAN, used to connect to USB B
plug with USB A/B connection cable MI701.
*Cannot use a USB flash drive.
LAN socket
Used to communicate with a PC.
System
Make the basic setting for MSG703 as shown below.
Definition of label
The label attached to the head of the file name is defined. It'll be used in
every save operation.
Time setting
The time is set for displaying in the lowest column on the screen and
using in save operation of a file.
Color of LCD
Either of five kinds of colors or monochrome can be selected as the
color of LCD screen.
Backlight
The backlight on or off can be selected. However, when it is off, it turns
on the moment any key is pressed.
Brightness of backlight
The brightness of the backlight can be adjusted in the range from 0 to
100 (maximum brightness).
Buzzer
The buzzer on or off can be selected.
1
2
3
4
5
6
