manualshive.com logo in svg

Micronics Twister LX, Руководство пользователя

Поделиться
Скачать
Micronics Twister LX Скачать руководство пользователя страница 7

Twister LX System Board Manual

Introduction

Thank you for choosing the Twister LX system board.
The Twister LX is an advanced single processor solution
for the industry’s most demanding server and worksta-
tion applications.

Based on the Intel 440LX AGPset, the Twister LX
supports the latest advanced processor architecture, the
Pentium

 II (processor-on-a-cartridge). The Pentium

 II

processor introduces a new level of performance for the
business computing environment including enhanced
multimedia and improved Internet and communications
capabilities.

Features of Twister LX include an AGP (Accelerated
Graphics Port) bus slot, Hardware Management support,
Ultra DMA/33 IDE hard drive protocol and SDRAM
memory support and Error Checking and Correction
(ECC) on the L2 cache for improved data integrity and
reliability.

Micronics builds all products to exacting standards, using
the highest quality components available. We are proud
to provide this system board and believe you will be
pleased with your purchase.

5

Introduction

Содержание Twister LX























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды