manualshive.com logo in svg

Micronics Twister LX, Руководство пользователя

Поделиться
Скачать
Micronics Twister LX Скачать руководство пользователя страница 2

Twister LX System Board Manual

2

Copyright Notices

Copyright 

 

1998 Micronics Computers, Inc. The information con-

tained in the Twister LX PCI/ISA/AGP Pentium II system board
manual has been carefully checked and is believed to be accurate.
Micronics assumes no responsibility for any inaccuracies that may be
contained in this document. Micronics makes no commitments to
update or to keep the information in this manual at a current level
when changes are made to the product.

Micronics reserves the right to make improvements to this document
and/or product at any time and without notice. All Rights Reserved.
No part of this document may be photocopied, reproduced, trans-
lated, or reduced to any medium or machine form without prior,
written consent from Micronics.

Portions of the Manual

Portions of this manual were copied (with permission) from Award
Software, Inc. All rights reserved.

Trademarks

IBM is a registered trademark of International Business Machines.
Microsoft and Windows are registered trademarks of Microsoft Cor-
poration. Intel, PCI and AGP are registered trademarks of Intel
Corporation. All other product names mentioned herein are used for
identification purposes only and may be the trademarks of their
respective companies.

Содержание Twister LX























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды