7
MICRONFILTER S.r.l Corso Europa 607, 10088 Volpiano (TO) Italy
P.IVA 09719130016 TEL +39 011 9702 830 FAX +39 011 982 2020
[email protected] www.micronfilter.it
4. DIRECTIONS FOR USE AND LIMITS OF USE
The filter has been designed for separating oil particles and oil emulsions from the air taken from
machine tools such as lathes, gear cutters, grinders and cold printing machines. It is also possible to
use it whenever there are oily mists, even in the food, pasta industries etc. on the condition that
operating temperatures do not exceed 40°C.
The filter is not designed to treat flammable or explosive vapours by nature or by reaction. For these uses, always consult the
MICRONFILTER Technical Office.
It is forbidden to smoke while the filter is operating.
The incorrect cleaning or replacement of the filter media leads to the risk of allowing
the polluting agent to be released into the outdoor and working environments.
It is compulsory to earth the filter by connecting the contact points to a copper plait
with a suitable cross section (a cross section of 2.5 mm
²
is recommended), secured to
the article, taking care to maintain continuity.
Drawing 3
