22
MICRONFILTER S.r.l Corso Europa 607, 10088 Volpiano (TO) Italy
P.IVA 09719130016 TEL +39 011 9702 830 FAX +39 011 982 2020
[email protected] www.micronfilter.it
13. WARRANTY
1.
General conditions
Micronfilter s.r.l. (hereinafter known as
Supplier
) undertakes to deliver to the purchaser products conforming
to the agreement which are exempt from defects such as to make them unsuitable for the use to which
products of the same type are employed and guarantees the products sold for 365 days from the date of
delivery with an hourly limit of use equal to 2000 hours.
The guarantee ex-
Supplier’s
works is limited to the replacement or repair of the products which, in the
unquestionable opinion of the
Supplier,
are defective. Components not directly constructed by the
Supplier
will be the subject of a guarantee according to the conditions used by his supplier to the
Supplier
.
It remains understood that all the components replaced shall be the property of the
Supplier
or his supplier.
2.
Notification of non-conformity to guarantee or defective product
The notification of non-conformity or defect of the product must be communicated in writing to the
Supplier
with a clear indication of its nature within 15 days of the date it was found or could have been found following
a thorough examination of the product. In addition, the purchaser, against
Supplier’s
request, must place at
the disposal of the
Supplier
, the product deemed non conforming and/or allow people assigned by the
Supplier
to carry out all the checks that the
Supplier
deems suitable in order to ascertain the effective non
conformity or defect of the product. The lack of communication of the potential non-conformity or fault of
the product in the times indicated and/or if the latter is not made available shall cause the immediate
termination of the guarantee. The purchaser also forfeits the guarantee if, the supplier has requested the
faulty piece to be returned at his expense and the purchaser omits to return such piece within a short period
of the request.
The regulations of articles 40 and 44 of the Vienna Convention shall not be applicable in any case.
3.
Repairs or replacements
The
Supplier
shall fulfill the obligations set out in the guarantee by repairing or replacing the non-conforming
or defective parts. In order to fulfill the guarantee the
Supplier
can choose:
a)
to carry out the repairs at his factory: in this case the purchaser is obliged to send at his expense, the
products to the factory indicated by the
Supplier
and to collect them ex-factory, after the execution
of the guarantee.
b)
to carry out or have carried out by third parties the repairs and/or replacements in the place where
the products are located. In this case the travelling costs, board and lodgings shall be at the expense
of the purchaser;
c)
to have the repair and/or replacement carried out by the purchaser supplying the relative
instructions and possibly supplying free of charge, ex the
Supplier’s
factory or reimbursement of the
spare parts.
