4
MICRONFILTER S.r.l Corso Europa 607, 10088 Volpiano (TO) Italy
P.IVA 09719130016 TEL +39 011 9702 830 FAX +39 011 982 2020
[email protected] www.micronfilter.it
Drawing 1
T
HE UNIT IS DESIGNED TO WORK WITH NEGATIVE PRESSURE
.
3. PRELIMINARY INSPECTION AND ASSEMBLY
The ECOTECH filter reaches the customer fully assembled. The unit is protected by suitable
packaging and can be transported on pallets.
For the weights, refer to the information shown in
the technical table.
In order to move the material, use appropriate lifting equipment and take all the
safety precautions envisaged on the construction site.
After removing the material from the packaging, make a visual check that it has not been damaged
during transportation and use the checklist to check that all the components have been supplied. If
this is not the case, inform your dealer as soon as possible and nevertheless no later than 10 days
from delivery.
For movement over short distances in the workplace, it is necessary to disconnect the source of
electrical energy and the utilities. It is then possible to move the machine with ease.
3.1. Assembling the cartridge
The cartridge is fixed to the platform by pressure exerted by the support plate (
A
): after placing the
cartridge on the plate, rotate it clockwise, positioning the seal of the cartridge a few millimetres
from the roof. Using the box spanner supplied, turn the bolt (
B
) clockwise until fully blocked.
