background image

COPYRIGHT 

Copyright  

©

2006/2007 by this company.  All rights reserved.  No part of 

this publication may be reproduced, transmitted, transcribed, stored in a 
retrieval system, or translated into any language or computer language, in 
any form or by any means, electronic, mechanical, magnetic, optical, 
chemical, manual or otherwise, without the prior written permission of this 
company. 

 

FCC COMPLIANCE STATEMENT 

This device complies with Part 15 of the FCC Rules. Operation is subject 
to the following two conditions: (1) this device may not cause harmful 
interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation. 

  

Any changes or modifications not expressly approved by the party 
responsible for compliance could void the authority to operate equipment. 

 

DISCLAIMER 

This company makes no representations or warranties, either expressed 
or implied, with respect to the contents hereof and specifically disclaims 
any warranties, merchantability or fitness for any particular purpose.  Any 
software described in this manual is sold or licensed "as is". Should the 
programs prove defective following their purchase, the buyer (and not this 
company, its distributor, or its dealer) assumes the entire cost of all 
necessary servicing, repair, and any incidental or consequential damages 
resulting from any defect in the software. Further, this company reserves 
the right to revise this publication and to make changes from time to time 
in the contents hereof without obligation to notify any person of such 
revision or changes. 

 

 

 

 

Содержание SP755D




































































































Отзывы: