15
4. Factory Reset
If you face some problem on current setting and want to make the system go
back to the initial state, you can use factory reset.
5. Warm Start
System will reboot after selecting this item.
The following is the function keys to navigate the console program screens.
To do this …
Control Key
Return to previous page or
Abort current setting
Do not key-in any numeric key
but [Enter]
Select an item
Numeric key + Enter
The following sections are detail content of each sub-screen of [Main Menu]
console page.
Port Status/Configuration Screen
This screen indicates each 10/100Mbps port’s status, including
auto-negotiation, 100M full-duplex, 100 half-duplex, 10M full-duplex, 10
half-duplex. Symbol “V” means the status of each port. You could change the
setting of each port by entering the port number (1-24) then press [Enter] key.
Gigabit ports (25-26) support auto-negotiation mode and have capabilities of
10/100/1000Mbps full duplex mode.
