14
1. Port Status/Configuration
This function is used to check operating status of all ports and setup the port
configuration, like half/full duplex mode and auto-negotiation.
2. VLAN Status/Configuration
The device supports six port-based VLAN groups (1, 2, 3, 4, 5 and 6) and the
group overlap is allowed. From this item, you could view current VLAN setting
and make modification.
3. Trunk Status/Configuration
This item is used to review and setup the port trunk function. There are total
seven trunk groups could be configured as the following table:
Trunk Group
Trunk Ports
Trunk Port_1
1, 2, 13, 14
Trunk Port_2
3, 4, 15, 16
Trunk Port_3
5, 6, 17, 18
Trunk Port_4
7, 8, 19, 20
Trunk Port_5
9, 10, 21, 22
Trunk Port_6
11, 12, 23, 24
Trunk Port_7
25, 26
