manualshive.com logo in svg

MicroNet SP3524A, Руководство пользователя

Поделиться
Скачать
MicroNet SP3524A Скачать руководство пользователя страница 75

 

 

72

Important Safety Instructions 

Caution: The direct plug-in wall transformer serves as the main disconnect for 

the product. The socket outlet shall be installed near the product and 

be readily accessible. 

Caution: Use only the power supply included with this product. In the event the 

power supply is lost or damaged: In the United States, use only with 

CSA certified or UL listed Class 2 power supply, rated 5Vdc 1A or 

above. IN Europe, use only with CE certified power supply, rated 5Vdc 

1A or above.  

Do not use this equipment near water, for example in a wet 

basement. Avoid using a telephone during an electrical storm. There 

may be a remote risk of electrical shock from lightning. 

Do not use the telephone to report a gas leak in the vicinity of the 

leak. 

If trouble is experienced with this unit, please contact customer 

service at the address and phone listed below. Do not disassemble 

this equipment. It does not contain any user serviceable components.

 

 

FCC Warning 

This equipment has been tested and found to comply with the limits for a 

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits 

are designed to provide reasonable protection against harmful interference 

when the equipment is operated in a commercial environment. This 

equipment generates, uses, and can radiate radio frequency energy and, if 

not installed and used in accordance with the instruction manual, may 

cause harmful interference to radio communications. Operation of this 

equipment in a residential area is likely to cause harmful interference in 

which case the user will be required to correct the interference at his own 

expense. 

 

CE Mark Warning 

This is a CE class A product. In a domestic environment, this product may 

cause radio interference in which case the user may be required to take 

adequate measures. 

 

 

Содержание SP3524A













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды