manualshive.com logo in svg

MicroNet SP3524A, Руководство пользователя

Поделиться
Скачать
MicroNet SP3524A Скачать руководство пользователя страница 74

 

 

71

 

Appendix F: Compliance and Safety Information

 

FCC Radio Frequency Interference Statement 

This equipment has been tested and found to comply with the limits for a 

computing device, pursuant to Part 15 of FCC rules. These limits are designed 

to provide reasonable protection against harmful interference when the 

equipment is operated in a commercial environment. This equipment generates 

uses and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio 

communications. However, there is no guarantee that interference will not occur 

in a particular installation. If this equipment does cause harmful interference to 

radio or television reception, which can be determined by turning the equipment 

off and on, the user is encouraged to try to correct the interference by one or 

more of the following measures: 

 

1.  Reorient or relocate the receiving antenna. 
2.  Increase the separation between the equipment and receiver. 
3.  The equipment and the receiver should be connected to outlets on separate 
circuits. 
4.  Consult the dealer or an experienced radio/television technician for help. 

 

Changes or modifications not expressly approved by the party responsible for 

compliance could void the user’s authority to operate the equipment. 

 

If this telephone equipment causes harm to the telephone network, the 

telephone company will notify you in advance that temporary discontinuance of 

service may be required. But if advance notice isn’t practical, the telephone 

company will notify the customer as soon as possible. Also, you will be advised 

of your right to file a complaint with the FCC if you believe it is necessary. 

The telephone company may make changes in its facilities, equipment, 

operations or procedures that could affect the proper functioning of your 

equipment. If they do, you will be notified in advance in order for you to make 

necessary modifications to maintain uninterrupted service.  

 

This equipment may not be used on coin service provided by the telephone 

company. Connection to party lines is subject to state tariffs.  

 

Содержание SP3524A













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды