System Overview
3
2
System Overview
Important:
Ensure that the "Auto Network" procedure described on the
yellow instruction sheet and full Setup and Calibration has been
performed correctly before attempting to use your Micronet system.
2.1
Display Features
2.2
Remote Control
Your Dual Maxi Display is designed to be controlled and configured
using a Tacktick Remote Display. See the user guide supplied with the
Remote Display for details of using the Remote Display in remote control
mode. All references in this user guide to the
,
,
or
buttons refer to the appropriate button on the Remote Display.
Upper and Lower Panes
The upper and lower panes of the Dual Maxi Display function
independently; each pane acts as a separate display and can be
configured separately.
When a Dual Maxi Display is selected using the
button of the
Remote Display, the upper pane of the Dual Maxi will flash, indicating
that it is selected for remote control. A further press of the
button
will cause the lower pane of the Dual Maxi to flash, indicating that this
pane is now selected for remote control.
Note:
If a Remote Display is not available, the single control button
provides a limited control capability, see page 16 for details.
Note:
for configuration of the Dual Maxi Display a Remote Display is
required.
See page 18 for details of configuring your Dual Maxi Display.