Micron NetFRAME 2100 Series, Руководство по эксплуатации продукта

Страница: 97 / 178

1HW)5$0(6HULHV6HUYHU3URGXFW*XLGH
0LFURQ(OHFWURQLFV,QF
DOS box is insufficient and will provide incorrect results. Programming
the
BMC FRU area clears the SDR table, therefore the SDR table must be
reprogrammed. Upon completing the programming of the FRU and SDR areas,
the
server should be rebooted.
Note: DOS users may alternatively use a ’/’ instead of the ’-’.
The following information is display if -v option is included in the command line.
The /D FRU command may be followed with up to 16 device addresses. These
device addresses are used to view up to 16 different FRU areas, instead
of
the default of displaying the BMC FRU. The arguments following the "-d
FRU"
are in the same order and value as the NVS_TYPE, NVS_LUN, DEV_BUS and
DEV_ADDRESS which are found in the FRU file header in each FRU file. The
LUN address is optional. If the LUN address is used, it must start with
an ’L’.
Usage: FRUSDR -d fru (device) [lun] (bus) (addr) (addr2) (etc)
Example: FRUSDR /D FRU IMBDEVICE L00 00 C0 C2
The configuration file may be used to load multiple FRU and SDR files.
In the configuration file, you may define which FRU and SDR areas are to
be programmed. Additionally, you may request information from the user
or ask the user to choose which areas to program.
'LVSOD\LQJD*LYHQ$UHD
When the utility is run with the -d DMI, -d FRU, or -d SDR command line flag, the indicated area is
displayed. Each area represents a sensor; one sensor for each instrumented device in the server.
If the given display function fails because of an inability to parse the data present or a hardware
failure, the utility displays an error message and exits.
Displaying DMI Area
The DMI area is displayed in ASCII format when the field is ASCII or as a number when the field is a
number. Each DMI area displayed is headed with the DMI area designated name. Each field has a
field name header followed by the field in ASCII or as a number.
Example:
To display the DMI area, type
frusdr -d dmi
and press <Enter>. A message similar to the
following appears:
Displaying DMI Area...
System Information (Type 1, 8 bytes)
Manufacturer = Intel
Product = NA440BX BP
Version = 000000000000
Serial Number = 0123456789