Micron NetFRAME 2100 Series, Руководство по эксплуатации продукта

Страница: 89 / 178

1HW)5$0(6HULHV6HUYHU3URGXFW*XLGH
0LFURQ(OHFWURQLFV,QF
•
Help - provides version information and help topics for the EMP Console.
6HUYHU&RQWURO2SHUDWLRQV
Three server control operations are available from the menu or toolbar of the main EMP Console window,
remote server connection, powering the server on and off, and resetting the server. The server console
mode can also be switched between EMP active and BIOS redirect modes through post-power-up and
reset options.
&RQQHFW
When you select [Re]Connect from the Connect menu, the Connect dialog in Figure allows you to connect
to a selected server. If the client machine is already connected to a server, initiating connection generates
a warning message. It lets you know that the existing connection will be terminated if you continue trying to
initiate the new connection. You are prompted to enter the EMP password whenever a connection is
attempted.
Figure 31. Connect Dialog
Options available in the dialog are:
•
Line Selection - you can specify whether to use a direct connection or dial-up modem
connection to the server.

Dial-up - connects to a selected server with a modem.

Direct connect (Serial Line) - connects to the selected server directly using a null
modem serial cable.
•
Server - you can select or enter a server name from a dropdown edit list box of available
servers. A server must be selected when the line selection is Dial-up.
•
Serial Line - must be filled out when the line selection is set to Direct connect (Serial
Line).

Baud Rate - must be 19200 for EMP to connect properly.

COM Port No. - set the COM Port number to which the null modem serial cable is
connected.
•
Connect - initiates connection to the connected server. When this button is clicked, you
are prompted for the EMP password.
•
Config - displays the Phonebook dialog.
•
Cancel - exits the Connect dialog without any action taken.