Micromeritics AquaPrep 055, Руководство оператора

Страница: 13 / 22

AquaPrep 055 Installing the AquaPrep
Oct 09 2-3
2. Using a pointed object, remove the fuse block and cover assembly from the power
connector on the rear panel of the AquaPrep.
3. Pull the voltage selector card straight out of the power connector housing.
4. Orient the voltage selector card so that the desired voltage is indicated at the bottom.
Orient the indicator pin so that it points upward as shown in the following illustration.
5. Insert the voltage selector card into the power connector housing with the edge containing
the desired voltage first and with the printed side facing the power ON/OFF switch.
Indicator Pin
Voltage