Installing the 1-mmHg Transducer Option Only
ASAP 2420 1-mmHg Transducer Option
8
Feb 2010
20. Attach the ribbon cable from the 10-mmHg transducer to the
J8
connector on the
transducer board.
21. Replace the top panel.
22. Replace and tighten the top panel retaining screws.
23. Turn on power to the analyzer and to the vacuum pumps.
24. Install the updated software (refer to the
ASAP 2420 Operator’s Manual
for instructions).
25. Open the ASAP 2420 software.
J8
10-mmHg
transducer
