Microlife BP3GX1-5A, Инструкция по эксплуатации

Страница: 23 / 63

22
5.9. Battery change indicator
Batteries almost discharged
When the batteries are approximately 75% used, the
battery symbol will flash a few times as soon as the
instrument is switched on (if at least one of the batter-
ies still has some charge). Although the
instrument will continue to measure reliably, you
should obtain replacement batteries.
Batteries discharged – replacements required
When the batteries are discharged, the battery symbol will appear,
unblinking, as soon as the instrument is switched on. You cannot take any
additional measurements and must replace the batteries.
1. Open the battery compartment on the bottom of the instrument.
2. Replace all of the batteries at the same time, ensure they are correctly
connected, as shown on the symbols in the compartment.
3. The memory retains all values although date and time (and possibly also
set alarm times) must be reset – the year number will flash automati-
cally after the batteries are replaced.
4. To set date and time, follow the procedure described in Section 4.3.
Note:
Use four new, Long-Life 1.5 V AA batteries. Do not use batteries beyond
their expiration date. If the monitor is not going to be used for a prolonged
period, the batteries should be removed.
Using rechargeable batteries (not recommended)
You can operate this instrument using rechargeable batteries.
• Please use only type "NiMH" reusable batteries.
• If the battery symbol ( ) appears, the batteries must be removed
and recharged. They must not remain inside the instrument, as they may
become damaged through total discharge even when switched off. The
batteries must NOT be discharged in the blood pressure monitor. If you
do not intend to use the instrument for a week or more, always remove
the rechargeable batteries.
• Recharge these batteries using an external charger and follow manufac-
turer’s instructions carefully.