18
5.4. Taking a measurement
After the cuff has been appropriately positioned the
measurement can begin. Remain still during your
measurement, do not flex muscles.
a) Remain seated quietly for 5 minutes before you
begin the measurement.
b) Press the POWER button. After the system check,
the monitor displays OK and the pump begins to
inflate the cuff. On the display, the increasing cuff
pressure is continually shown.
c) After automatically reaching an individual
pressure, the pump stops and the pressure will
release. The cuff pressure is displayed during the
measurement.
d) When the device has detected your pulse, the
heart symbol in the display begins to blink.
e) When the measurement has been concluded, the
air will automatically release from the cuff. The
measured systolic and diastolic blood pressure
values, as well as the pulse, are now displayed.
f) The measurement results are displayed until you
switch the device off. If no button is pressed for 1
minute, the device switches off automatically.
g) When the unit is set to the MAM (Microlife
Averaging Mode) setting, 3 separate measure-
ments will take place in succession, after which
your result is calculated and displayed as a single,
averaged measurement (individual results are not
displayed). There is a 15 second resting time
between each measurement. A count-down
indicates the remaining time between measurements.
If one of the measurements causes an error
message, it will be repeated one more time. If any
additional error occurs, the measurement will be
discontinued and error code displayed.
Pumping
Pressure
Measuring
Measurement
Complete
Systolic
Diastolic
Pulse
Содержание BP3GX1-5A
Страница 1: ......
Страница 31: ...30 Monitor de Presión Arterial Automático de Primera Calidad Manual de Instrucción Modelo BP3GX1 5A ...
Страница 38: ...37 9 Garantía limitada 10 Especificaciones técnicas 11 Como contactarnos ...
Страница 63: ...BP3GX1 5A 0917 3 ...