Microlife BP3GR1-3P, Инструкция по эксплуатации

Страница: 21 / 61

19
5.5. Memory: reviewing readings
At the end of a measurement, this monitor automatically stores
each result with date and time. This unit stores 30 memories.
Viewing the stored values
With the unit off, press the "M" button. The display first shows
"A," then shows an average of all measurements stored in the
unit.
Pressing the "M" button again displays the previous value. To
view a particular stored memory, press and hold the "M" button
to scroll to that stored reading.
Memory full
When the memory has stored 30 results, a new, measured
value is stored by overwriting the oldest value.
Clear all values
If you are sure that you want to
permanently remove all stored values,
hold down the "M" button (the instrument
must have been switched off beforehand)
until "CL" appears and then release the
button. If you do not want to clear the
values, press the POWER button. To
permanently clear the memory, press the
"M" button while "CL" is flashing.
Individual values cannot be cleared.
5.6. Stopping a measurement
If it is necessary to interrupt a blood pressure measurement for
any reason (e.g., the patient feels unwell), the POWER button
can be pressed at any time. The device then immediately
lowers the cuff pressure automatically and enters sleep mode.