Microlife BP3GR1-3P, Инструкция по эксплуатации

Страница: 6 / 61

4

Use third party accessories. Only use Microlife authorized
accessories, such as cuffs or AC adapters, as those not
approved for use with the device may provide inaccurate
measurements, injury, and/or damage the device.
STANDARDS:
In addition to the standards stated in the Instruction Manual:
• This medical device is compliant with medical device and
non-invasive blood pressure monitor standards IEC 60601-1,
IEC 60601-1-2, IEC 60601-1-11, and AAMI/ANSI/IEC 80601-2-
30, and
• Electromagnetic standards IEC 60601—1-2 along with FCC
Part 15, and
• Clinical Testing per standard ISO 81060-2:2013 was conduct-
ed on blood pressure device using the same measurement
technology.
Please note: According to international standards, your monitor
should be checked for accuracy every 2 years.
TYPE
IP20: Protected against solid foreign particles with a
diameter of more than 12.5 mm, no protection
against water. Keep Dry.
Type BF Applied Part
EXPECTED LIFE
Monitor: 5 Years
Cuff: 2 Years
Batteries and electronic instruments must be disposed of in
accordance with the locally applicable regulations, not with
domestic waste.
BHS
The B.H.S. (British Hypertension Society) clinical protocol was
used to measure the accuracy of this product. Blood pressure
units using the same measurement technology are graded "AA"
for systolic/diastolic accuracy by independent investigators using
the BHS protocol. This is the highest grading available for blood
pressure monitors. Please see bhsoc.org for more information.