Microlife BP 3SZ1-1, Инструкция по эксплуатации

Страница: 15 / 36

EN
15
WatchBP O3
During blood pressure measurements
The patient should be reminded to remain still, refrain
from talking, and to breathe normally during the
measurement. If the patient is occupied at the start of a
measurement, the patient should, where possible, try to
relax the measurement arm.
Storing measurement data – The device can store
up to 330 memories, which includes measurements,
medication records, errors and start/ stop events.
Repeat the blood pressure measurements in case
of an error
– The device will automatically repeat the
measurement after a two-minute countdown should an
error occur during measurement.

At any time, a single measurement can be stopped by pressing the Start/
Stop or ON/OFF button.

If the repeat measurement encounters an error again, the device will
take an extra measurement after a four minutes countdown. If the extra
measurement is not successful either, the device will record an error
message.

If the device stops taking measurements, the patient should return the
device to determine the cause of error.

When the memory is full the LCD screen of the device displays ‘Full’ and no
further measurements or medication records can be performed. Upload
the measurement data and clear the memory to reset the device.