3. Connect Singlemode duplex fiber with Duplex LC/UPC Interfaces to optical port
F/O 1
(Other Interfaces
available)
- Fiber length must be shorter than 2km
Please contact Sales for other fiber length requirements
-
Clean fiber before connecting
- Optical ports can be connected in any manner
-
Only one optical fiber connection needed for operation.
- Recommended second fiber connected to optical port
F/O 2
for redundancy.
4.
(Optional)
Connect Ethernet Cable to the unit’s Ethernet
Local
port
Local/Debug
port used for on-site debugging while maintaining connection to the NOC (Network
operations center)
Note: Both Ethernet ports on the
GPSR400
are a transparent bridge. Both Remote Unit and Head-
End supports Ethernet over CPRI. Either unit can provide a local network connection to the other. See section
“System Configuration and Operation”
DO NOT CONNECT THE REMOTE UNIT AND HEAD-END TO THE SAME SWITCH. CONNECTING BOTH UNITS ON
THE SAME LAN WILL CREATE A BRIDGE LOOP
Microlab, A Wireless Telecom Group Company, 25 Eastmans Road, Parsippany, NJ 07054
Tel: (973) 386-9696 • [email protected] • www.microlabtech.com • Fax: (973) 386-9191
GPSR400 Quick Start Guide
US Model, 4-Channel Remote Outdoor Unit
page 5
Connections RF, Optical, and Ethernet (Continued)
LC/UPC Duplex
Interface
F/O 1
F/O 2
Local
Local/
Debug
