Microlab, A Wireless Telecom Group Company, 25 Eastmans Road, Parsippany, NJ 07054
Tel: (973) 386-9696 • [email protected] • www.microlabtech.com • Fax: (973) 386-9191
GPSR400 Quick Start Guide
US Model, 4-Channel Remote Outdoor Unit
page 12
View Satellite Data:
1. Click “GPS A” or “GPS B” in the menu tree on the left.
2. Satellite information will be displayed under “Satellite Data” if the respective GPS receiver has
successfully locked to a GPS signal on one of it’s corresponding antennas.
Otherwise, no data will be displayed for that GPS receiver.
• Satellite Indicators:
○ Good/Used Satellites
WILL
be shown in
GREEN
○ Satellites
NOT
used will be shown in
Yellow
Web Console (“GPS A” and “GPS B”)
The
GPSR400
unit has two GPS receivers on board for redundancy. These are referred to as “GPS
A” and “GPS B”. Each receiver has the ability to automatically switch over from a primary GPS an-
tenna to a secondary GPS antenna if there is an antenna failure. The
GPSR400
actively monitors
the health of all four GPS antennas connected and will seamlessly switch to the best antenna.
Each receiver monitors the following antennas:
-
GPS A:
“GPS In 1 (Antenna A)” & “GPS In 2 (Antenna B)”
-
GPS B:
“GPS In 3 (Antenna C)” & “GPS In 4 (Antenna D)”
