micro
HAM ©
2016
All rights reserved
6 -
micro
HAM USB DEVICE ROUTER
ROUTER MENU
Restore Router Settings:
used to restore settings from a
urs
file created by the backup command.
A
urs
file can be used only with the device for which it was generated (the file contains the unit serial
number) on a computer with same port assignments.
WARNING:
Restoring a backup deletes all current Router settings including presets, use it carefully!
Backup Router Settings:
used to create backup
urs
file.
This file contains Router settings (including Presets) for all devices defined in Router.
Options | General
Load Router on Start-up:
when checked, Router will start automatically each time the computer is
started or rebooted.
Start Router Minimized:
when checked, Router will started minimized
Options | Band Map:
(Not used with Station Master)
Customizable band edge boundaries used to drive the band data output. BCD codes can be customized for
driving antenna switches or bandpass filter control.
Options | Digital Band Map:
(Not used with Station Master)
Options | Audio Devices:
(Not used with Station Master)
Options | DVK:
(Not used with Station Master)
Options | USB:
Noise immunity:
selects how many times an undelivered USB packet will be repeated before the USB
device is disconnected from the operating system.
Response time:
selects how long the USB interface will wait for additional data before sending data to
the operating system.
Minimize:
Clicking this will minimize Router to the system tray
at the bottom right corner of the Windows Task Bar (the
"System Notification Area").
TIP:
When Router is minimized you can restore it by
double-clicking on the Router tray icon. You can also restore Router by double-clicking on the Router
icon on the desktop or in the Programs menu.
Exit:
Clicking on this item will terminate Router.
NOTE:
when Router is terminated the virtual ports will be closed and application software will be unable to
communicate with Station Master and the radio.
15
