HiLink User manual EN
–
v 1.0.1
25
6.2
RTP
RO AND
H
I
L
INK WITH CONNECTION AT START OR FINISH
In this situation the RTPro stopwatch can be connected by cable or via BT directly to the HiLink device at the
start or finish using the methods described in the previous parameter. In the case of connection via BT, the
stopwatch must remain at a communication distance supported by BT technology (approximately less than
50m).
6.3
RTP
RO AND
H
I
L
INK USED IN CONJUNCTION WITH
E
NC
R
ADIO
MF
TRANSMITTERS
The HiLink system fully interfaces with the old EncRadio MF 10mW and 500mW transmitters without any need
for specific configurations. However, the following parameters must be taken into account:
