HiLink User manual EN
–
v 1.0.1
19
5
C
ONNECTION TO THE
R
EI
P
RO AND
RTP
RO
S
TOPWATCHES
The HiLink system when used as a receiver can be connected to the ReiPro and RTPro stopwatches either by
cable (use the $CAB202 cable) or directly via Bluetooth.
In the case of a Bluetooth connection, HiLink decodes the radio signal and sends the time of day of the received
pulse to the stopwatch. The stopwatch and HiLink must be synchronized in order to obtain correct
information. By default, a configuration (HiSynch Enabled=ON) is active on ReiPro and RTPro which
automatically synchronizes the time base of the stopwatch with that of HiLink when connected. In this case
(HiSy
nch parameter enabled) “HiSynch completed HiLink SN0000XX” will also be displayed.
The BT connection symbol will also appear in the status bar on the HiLink device and if synchronization is
complete the colour of the time of day will be White.
If the HiSynch parameter is disabled the stopwatch will receive the information only if both the stopwatch
and HiLink are synchronized either by cable or via satellite signal.
