Microcom Phone Buddy Comfort, Руководство пользователя

Страница: 22 / 102

2 2
2 2
2 2
2 2
Troubleshooting
If your telephone does not behave the way you want it to, please try first to help yourself with the following tips.
Fault Possible cause Solution
No display Batteries empty Replace the batteries
Can not send The SMS centre Set the SMS centre sending number
any message sending number or verify if the number is correct
has not been set
or was incorrect
Pick a handset, and dial the SMS center
number, by using any handset and listen
for response. If not please inquire for
the correct SMSC number with your operator.
Can not receive The SMS centre Sett the SMS centre receiving number - verify
the message receiving number which number is calling you on the display
is not set or is incorrect of the unit. The SMSC receiving number
needs to match exactly the number you see
in your display
The SMS centre Inquire for the correct SMSC number
receiving number with your operator
not correct
ATTENTION:
When you use your device on the analogue ports of a PABX
Make sure the PABX is forwarding the CLIP information to your device. If you do not see any number on the display
this is most likely not the case and your unit can not receive any SMS, in this case you can activate the „accept all
calls“ feature see more page number 9.
If number is properly display, verify if your PABX needs a prefix number to dial out (mostly 0 or 9) . In many cases
you will see that the calling numbers include this prefix. Make sure you include this prefix in the SMSC number
for enabling the SMS receive function of your device.