Microcom Phone Buddy Comfort, Руководство пользователя

Страница: 17 / 102

1 1
1 1
7 7
7 7
Text message
Setting the box code
You can use the different SMS boxes in private mode by
defining a pin code number for Box1, Box2 and Box3.
Box0 is for public use.
Setting a new code
Open the menu
Select the menu item and confirm
Select the menu item and confirm
Select the menu item and confirm
Select the menu item and confirm
The LCD shows Enter Code , enter
the code number(0~9)
(up to 4 digits)
• During the sending, the LCD shows SMS Sending...
• If the net is busy, then LCD will show Try Again
• If you press X button while you are sending SMS message, LCD
will show Cancelled .
• If the message was not sent, the unit will return back to standby
mode, and the LCD shows Send Fail .
* Must be supported by your local operator and the device of the
destination owner.
• If the second code number is different to the first one, the LCD
will show Code Error !
• Set the code of Box2 and Box3 same as the steps of Box1.
• If you already set the code, when you want to enter the Box, you
need to enter your code number firstly.
• If you removed the code number, you can enter the box without
it.
• Also you can set a new code number again with the same steps
of Setting a new code number.
Clearing a set code number
Open the menu
Select the menu item and confirm
Select the menu item and confirm
Select the menu item and confirm
Select the menu item and confirm,
the LCD shows
Enter Code , then
enter the code number you have set.
Press to confirm, LCD shows Code
Removed ! , then exit.
SMS
Box 2
MENU
SMS Setup
Box Code
New Code
SMS
Box 2
MENU
SMS Setup
Box Code
Clear Code
• Press button, use or but-
ton to get the desired number from
phonebook, then press button.
• Press button, use or but-
ton to get the desired number from
CID list, then press button
Display shows Enter sub address*;
enter sub address of destination, if
you do not know the number, type 0
or press button.
Note: Sub addresses allow you to send your message to
a private SMS box, using 0 or no number automatically
send your message to the public box of the destination
number.
Press to send. When the message
was sent succesfully the unit, shows
Message Sent
CID
Press to confirm, LCD shows
Repeat Entry , enter the same code
number to reconfirm.
Press to confirm, LCD shows
Success ! , then exit.
English