Microchip Technology SA5 Series, Руководство пользователя

Страница: 40 / 63

MAC-SA5X User’s Guide
DS50002938A-page 40

2019 Microchip Technology Inc.
{help}
Description Returns a comma-delimited list of available commands. Commands that are not
accessible with the current authentication will not be included. Some fac-
tory-use commands may be included in the list, but are not described in this
manual because they present no usable information/function to the user outside
of the factory.
Arguments None.
Returns A comma-delimited list of command names. Example response is:
[=,ackalm,add,browse,chap,describe?,extremes?,get,
health?,help,hwrev?,latch,load,reset,serial?,session,
session?,set,store,swrev?,type?,upd]
Since V1.0
{hwrev?}
Description Returns the hardware revision of the device.
Arguments None.
Returns The MAC’s hardware revision, typically a single character.
Since V1.0
{latch}
Description Simultaneously latches the current output frequency and clears the digital tun-
ing. This is used to center the output frequency at the current digital tuning
value. The
DigitalTuning
parameter will be set to zero and the output fre-
quency will be unaffected. Similarly, the
DigitalTuning
value will be sub-
tracted from the current
EffectiveTuning
value.
Note: The new latched value is preserved across power cycle.
Arguments None.
Returns
[=1]
Since V1.0
{load}
Description Loads the most recent configuration from flash memory (Discipline settings,
Analog tuning configuration, etc). The device configuration is loaded automati-
cally on boot.
Arguments None.
Returns
[=1]
on success.
[=0]
if no stored configuration is available.
Since V1.0
{platform?}
Description Returns a short string identifying the firmware platform of the device.
Arguments None.
Returns
[=sa5x]
Since V1.0