Microchip Technology PRO MATE II, Руководство пользователя

Страница: 34 / 48

PRO MATE
®
II Device Support
DS30243H-page 30

1999 Microchip Technology Inc.
3.10 HCS361 Options
The programming dialog for HCS361 devices is shown in Figure 3.10.
Selectable options in this dialog are described in Table 3.10 and Table 3.11.
Options automatically set are described in Table 3.12.
Figure 3.10: Program Security Device Dialog – HCS361
Table 3.10: Selectable Options – HCS361
Option Description
User Serial
Number The encoder’s 32-bit (8-hex digits) serial number should
be entered here. If the Auto Increment check box is
selected, the serial number and/or user seed will be
automatically incremented when an encoder is
successfully programmed.
Modulation Format This selects between PWM and VPWM modulation of
data.
Transmission
Format See Table 3.11.
Baud Rate Select Slow: Basic Pulse Width of 400 µs.
Fast: Basic Pulse Width is 200 µs.
Code Word
Blanking Every alternate code word can be blanked out, thereby,
increasing the amount of power transmitted per
transmission if needed.
Delayed Mode If this is enabled, the encoder will transmit a delayed
seed transmission after about 3 seconds. See the data
sheet for more details.