Microchip Technology PRO MATE II, Руководство пользователя

Страница: 32 / 48

PRO MATE
®
II Device Support
DS30243H-page 28

1999 Microchip Technology Inc.
3.9 HCS360 Options
The programming dialog for HCS360 devices is shown in Figure 3.9.
Selectable options in this dialog are described in Table 3.7 and Table 3.8.
Options automatically set are described in Table 3.9.
Figure 3.9: Program Security Device Dialog – HCS360
Table 3.7: Selectable Options – HCS360
Option Description
User Serial
Number The encoder’s 32-bit (8-hex digits) serial number should
be entered here. If the Auto Increment check box is
selected, the serial number and/or user seed will be
automatically incremented when an encoder is
successfully programmed.
Modulation Format If this is enabled, the transmitted string is Manchester
modulated, if the option is not enabled Pulse Width
Modulation (PWM) is used.
Baud Rate Select See Table 3.8.
Code Word
Blanking Every alternate code word can be blanked out, thereby,
increasing the amount of power transmitted per
transmission if needed.
Delayed Mode If this is enabled the encoder will transmit a delayed
transmission after a time, see the HCS360 Data Sheet
(DS40152) for more details.