Microchip Technology PIC32CM JH01, Руководство пользователя

Страница: 23 / 37

4.4 Kit Modifications
The evaluation kit has several resistors and jumpers that can be removed or cut to disconnect the I/O pins of the
PIC32CM JH01 from the connectors and the on-board ICs to disconnect and measure power to different sections.
Table 4-30. Resistors
Designator From To Comment
R319 PA08 PDEC_PhaseA
Remove when PA08, PA09 and PA10 are used in Arduino
mode. Not mounted by default
R320 PA09 PDEC_PhaseB
R321 PA10 PDEC_Index
R322 PA08 ANALOG_IN A2
Remove when PA08, PA09 and PA10 are used in PDEC mode. R323 PA09 ANALOG_IN A3
R333 PA10 ANALOG_IN A4
R609 RESET RESET NET Remove to disconnect the RESET pin from the reset system.
R607 PB11 CDC RX
Remove to disconnect pins from the EDBG level shifters.
R610 RESET NET EDBG RESET
R611 PA31 EDBG SWDIO
R612 PA30 EDBG SWCLK
R614 PC12 MISO EDBG MISO
R618 PC00 EDBG GPIO0
R619 PC03 EDBG GPIO1
R620 PC02 EDBG GPIO2
R621 PC01 EDBG GPIO3
R712 RESET NET TA100 RESET
Remove to disconnect the TA100 RESET pin from the reset
system.
R713 PC07 TA100 RESET Remove to disable TA100 RESET through the PC07 pin.
R800 RESETN Arduino shield RESET
Remove to disconnect the reset system from the Arduino shield
connectors.
EV81X90A
Hardware User Guide
©
2022 Microchip Technology Inc.
and its subsidiaries
User Guide
DS70005482B-page 23