Microchip Technology PIC32CM JH01, Руководство пользователя

Страница: 19 / 37

...........continued
Cortex Debug
Connector pin
Pin / Net Function Shared Functionality
8 Not Connected - -
9 GND Ground -
10 RESET Target reset signal
EDBG SWD, Arduino,
RESET button, TA100
4.3 Peripherals
4.3.1 LED
One yellow LED is available on the evaluation kit that can be turned on and off. The LED is activated by driving the
connected I/O line to low.
Table 4-17. D700 - LED Connection
PIC32CM JH01 pin Function Silkscreen Text Schematic Net Name Shared functionality
PC05 Yellow LED0 LED0 PC05_USER_LED -
4.3.2 Mechanical Buttons
The evaluation kit contains two mechanical buttons connected to the PIC32CM JH01. One button is the RESET
button connected to the reset line, and the other is a generic user configurable button. When a button is pressed, it
will drive the I/O line to GND.
Table 4-18. Mechanical Buttons
PIC32CM JH01 pin Function Silkscreen Text Schematic Net Name Shared functionality
RESETN Reset RESET TARGET_RESET
EDBG SWD, Cortex Debug, Arduino,
TA100
PB19 GPIO SW0 PB19_USER_BUTTON -
4.3.3 Crystals
The evaluation kit contains one mounted 32.768 kHz crystal and one mounted 32 MHz crystal that can be used as
clock sources for the PIC32CM JH01.
Table 4-19. X301 - External 32.768 kHz Crystal
PIC32CM JH01 pin Function Schematic Net Name Shared functionality
PA00 XIN32 PA00_XIN32 -
PA01 XOUT32 PA01_XOUT32 -
Table 4-20. X300 - External 32 MHz Crystal
PIC32CM JH01 pin Function Schematic Net Name Shared functionality
PA14 XIN PA14_XIN -
PA15 XOUT PA15_XOUT -
EV81X90A
Hardware User Guide
©
2022 Microchip Technology Inc.
and its subsidiaries
User Guide
DS70005482B-page 19