MIC24045 Evaluation Board User’s Guide
DS50002619A-page 20
2017 Microchip Technology Inc.
FIGURE 4-7:
Output Voltage Ramp Up/Down.
4.2.7
Status Bar
The status bar provides information on the status of the device connected to the PC.
The items available in the status bar are shown in
Table 4-6
.
FIGURE 4-8:
Status Bar.
Hold interval
V
OUT
500 mV/div
20 ms/div
step size
Output Voltage
Target Voltage
GUI settings:
Output Voltage: 2.010V
Target Voltage: 3V
Step size: 210 mV
Hold interval: 20 ms
Repeat interval: 30 ms
Repeat time
TABLE 4-6:
STATUS BAR ITEMS
Item
Description
Status Label
The status label shows if there is any device connected to the board. Refer to
Table 4-7
for a list of
possible labels.
Progress Bar
This bar shows the level of completion for a given command.
TABLE 4-7:
STATUS LABELS
Status Label
Description
STATUS: Connected!
This message is shown when the GUI connects to a device.
STATUS: Disconnected!
This message is shown when the GUI does not detect a device connected.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
