GUI Description
2017 Microchip Technology Inc.
DS50002619A-page 17
The specific registers for MIC24045 device are described in
Appendix C. “MIC24045
Internal Registers”
.
4.2.4
MIC24045 I
2
C Programmable Features
The MIC24045 I
2
C Programmable Features area contains the items in
Table 4-3
.
FIGURE 4-4:
MIC24045 I
2
C Programmable Features Area.
TABLE 4-2:
I
2
C GENERIC REGISTER VIEW ITEMS
Panel
Item
Description
Operation
Register
This section shows the registers available for read/write operations.
Read/Write
These buttons are used for single register read/write operations.
ReadAll/WriteAll
These buttons are used for reading/writing all the available registers.
Number of Registers
In this section, the user can set the number of available registers for
read/write operations.
Update
This button sets the number of available registers for read/write
operations in the Register area.
Register Area
This section shows the current status of the address of the registers
and their content.
TABLE 4-3:
MIC24045 I
2
C Programmable Features
Panel/Button
Items
Description
Enable
This button controls the Enable pin of the MIC24045. The red color of this
button marks the Off state and green marks the On state.
Auto Disable
If this option is checked, the GUI automatically disables the part using the
Enable when critical parameters for the MIC24045 are changed.
Parameters
Switch Freq
This spin box allows setting the available switching frequencies.
Current Limit
This spin box allows setting the available low-side current limits in order
to obtain the nominal load currents.
Soft Start
This spin box allows setting the available soft-start times.
Start Delay
This spin box allows setting the available start time delays.
Read/Write
These buttons are used to write the registers that contain the information
described above.
Output Voltage
Voltage
This spin box allows setting the available output voltages.
Margining
This spin box allows setting the available margining options.
Read/Write
These buttons are used to write the registers that contain the output
voltage and the margining information.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
