manualshive.com logo in svg

Microchip Technology dsPIC30F6010, Техническое описание

Поделиться
Скачать
Microchip Technology dsPIC30F6010 Скачать руководство пользователя страница 2

DS70119B-page ii

Advance Information

 2004 Microchip Technology Inc.

Information contained in this publication regarding device
applications and the like is intended through suggestion only
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
No representation or warranty is given and no liability is
assumed by Microchip Technology Incorporated with respect
to the accuracy or use of such information, or infringement of
patents or other intellectual property rights arising from such
use or otherwise. Use of Microchip’s products as critical
components in life support systems is not authorized except
with express written approval by Microchip. No licenses are
conveyed, implicitly or otherwise, under any intellectual
property rights.

Trademarks

The Microchip name and logo, the Microchip logo, Accuron, 
dsPIC, K

EE

L

OQ

, MPLAB, PIC, PICmicro, PICSTART, 

PRO MATE, PowerSmart and rfPIC are registered 
trademarks of Microchip Technology Incorporated in the 
U.S.A. and other countries.

AmpLab, FilterLab, micro

ID

, MXDEV, MXLAB, PICMASTER, 

SEEVAL, SmartShunt and The Embedded Control Solutions 
Company are registered trademarks of Microchip Technology 
Incorporated in the U.S.A.

Application Maestro, dsPICDEM, dsPICDEM.net, 
dsPICworks, ECAN, ECONOMONITOR, FanSense, 
FlexROM, fuzzyLAB, In-Circuit Serial Programming, ICSP, 
ICEPIC, Migratable Memory, MPASM, MPLIB, MPLINK, 
MPSIM, PICkit, PICDEM, PICDEM.net, PICtail, PowerCal, 
PowerInfo, PowerMate, PowerTool, rfLAB, Select Mode, 
SmartSensor, SmartTel and Total Endurance are trademarks 
of Microchip Technology Incorporated in the U.S.A. and other 
countries.

Serialized Quick Turn Programming (SQTP) is a service mark 
of Microchip Technology Incorporated in the U.S.A.

All other trademarks mentioned herein are property of their 
respective companies.

© 2004, Microchip Technology Incorporated, Printed in the 
U.S.A., All Rights Reserved.

 Printed on recycled paper.

Note the following details of the code protection feature on Microchip devices:

•

Microchip products meet the specification contained in their particular Microchip Data Sheet.

•

Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the 
intended manner and under normal conditions.

•

There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our 
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip's Data 
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.

•

Microchip is willing to work with the customer who is concerned about the integrity of their code.

•

Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not 
mean that we are guaranteeing the product as “unbreakable.”

Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

Microchip received ISO/TS-16949:2002 quality system certification for 
its worldwide headquarters, design and wafer fabrication facilities in 
Chandler and Tempe, Arizona and Mountain View, California in October 
2003. The Company’s quality system processes and procedures are for 
its PICmicro

®

 

8-bit MCUs, K

EE

L

OQ

®

 

code hopping devices, Serial 

EEPROMs, microperipherals, non-volatile memory and analog 
products. In addition, Microchip’s quality system for the design and 
manufacture of development systems is ISO 9001:2000 certified.

Содержание dsPIC30F6010































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды