Orbit II Disc Copier Reference Manual – Revision K
23
5.8 Writer and Reader Test
This final trial run will verify that your new Orbit II has not suffered any shipping damage that affects either
the Writer or the Reader. You will make a back up copy of the Orbit II distribution CD-R, and you will
compare the copy to the master CD-R. You must first change Orbit II’s Setup so that
Burn CD?
is turned
on:
Turn
Burn CD?
on:
•
Press the
No
key at the
, ,
and Copy & prompts.
•
Press the
Yes
key at the
,
,
,
, and
prompts.
This sequence will return you to the prompt with
Burn CD?
on.
Copy the distribution disc:
•
Make sure there is one blank (unrecorded) CD-R in the Input Hopper.
•
Press the
Yes
key at the
prompt.
•
When the
prompt appears, press
Yes
to accept the “10s”
digit setting of “0”. The underline cursor will move to the “1s” digit. Press the
No
key once to
set the “1s” digit to “1”. Press
Yes
to accept the “1s” digit setting of “1”.
•
When the CD Reader tray opens, place the Orbit II distribution disc in the CD Reader tray and
press
Yes.
•
Orbit II will copy the distribution disc to the blank CD-R and place it in the Accept Basket.
System Setup?
Copy DISC-to-DISC?
Copy &
Compare?
Compare? DISC-to-DISC
Burn Disc?
Use Buzzer?
Copy Disc-to-Disc?
Copy Disc-to-Disc?
52x Write?
Ask Quantity?
Quantity? 00
