COPYWRITER PRO SERIES DUPLICATOR MICROBOARDS TECHNOLOGY, LLC
8
Copy CD to CD
IMPORTANT NOTE:
When copying CD to CD at 52x speed, it is very important to
use a clean, unmarked master. If there are scratches, fingerprints, dust, etc., on the
master, it will slow down the recording speed.
1. Place the Master Disc into the Reader drive
2. Place the blank CD-R(/W) disc(s) into the Recorder drive(s)
3. The display reads COPY START? (Disc to Disc)
Copy Start?
(Disc to Disc)
4. Press Yes
5. The display will now show the progress of the Copy Job
COPY 15:26
CD-DA 15%
6. The Recorder(s) will eject the CD-R discs when the job is complete.
7. The same procedure is used to copy CD+G master discs.
Simulation CD to CD
1. At the COPY START? (Disc to Disc) menu, press the NO key until the display
shows SIMULATION? (Disc to Disc)
Simulation?
(Disc to Disc)
2. Place the Master Disc into the Reader drive
3. Place the blank CD-R(/W) disc(s) into the Recorder drive(s) and wait 10 seconds
for the light(s) on the front of the Recorder(s) to stop blinking.
4. Press Yes
5. The display will now show the progress of the Copy Job
SIMULATION 15:26
CD-DA 15%
6. The Recorder(s) will eject the CD-R discs when the job is complete.
Note:
The CD-R media will NOT be recorded to in Simulation Mode.
