COPYWRITER PRO SERIES DUPLICATOR MICROBOARDS TECHNOLOGY, LLC
16
Error Messages
If any failure occurs during operations, an error message on LCD and a beep indicate as it is the
error. It beeps every two seconds which keep beeping until it stops. Opening a tray of drive
having the error stops beeping.
Descriptions for each error message are as follows:
ERROR MASTER
: Error during COPY/ VERIFY/ READ
CHECK with Master Drive
ERROR TARGET XX
: Error during COPY/ VERIFY/ READ
CHECK with Target Drive No. XX.
CODE XXXX
: ATAPI error code XXXX occurred.
MASTER ANALYZE
: Error while analyzing a master disc
VERIFY DATA
: Error during VERIFY
CANNOT VERIFY
: CD-DA or CD-ROM XA is tried to VERIFY.
DISC TYPE
: Unable to analyze a format of master data, or
not available format
USER STOP
: Cancel by an user, or unable to proceed an
operation any more
DATA SIZE
: No match in capacities between a master disc
and copied disc (s) during VERIFY
TIME OUT
: Time out error
SYSTEM ERROR
: Failed to boot up
MASTER NOT FOUND
: Master Drive not connected, or not recognized
PROGRAM SUM
: Problem with the copy program in Flash ROM
PROGRAM DISC
: Not proper firmware disc for DSR-2300
VERSION UP ERROR
: Failed to load firmware
ATAPI BUS
: Problem with response from drive
