COPYWRITER PRO SERIES DUPLICATOR MICROBOARDS TECHNOLOGY, LLC
13
Track Extraction
When extracting tracks to the internal hard drive, the CopyWriter Pro always uses the
first hard drive partition (HDD1). If there is information already stored on HDD1, the
system will ask if you want to overwrite this information. This partition cannot be
changed from HDD1.
1. Start up TRACK EXTRACTION mode.
Press “YES” in the following screen.
* TRACK EXTRACTION mode is not appeared unless HDD is connected.
Trk
EXTRACTION?
2. Press “YES” again in the following screen.
EXTRACTION
OK?
If any master data is already registered in HDD, the CopyWriter Pro asks you
whether you want to overwrite data.
Press “YES” to overwrite, “NO” to cancel.
EXTRACTION
OK?
3. Insert a master audio disc. CopyWriter PRO will analyze the master disc.
INSERT
MASTER DISC
ANALYZING
MASTER
4. After it completes to analyze the master disc, it displays Selected Track Number /
Total Track Number.
EXTRACT THE
Trk?
This master data has total 12 tracks.
Press “NO” to skip forward a track.
Press “YES” to select the track you want to extract.
5. If you skip forward all tracks, it asks if you want to end extraction for the master data.
END
EXTRACTION?
EXTRACT THE
Trk?
Since this master data has total 12 tracks, CopyWriter
PRO asks you to end extraction for this data if you press
“NO” after 12
th
track.
Press “YES” to finish extraction and register selected tracks in HDD.
Press “NO” to add more tracks from this master data.
