iID
®
PENsolid UHF
User Manual
UserMan-iID PENsolid UHF-002E.DOCX
© 2017 microsensys
QuickStartGuide
Performance description
iID
®
PENsolid is suitable for mobile data capture and wireless RFID read / write applications, which can be
connected via its integrated USB interface to PCs. The Bluetooth
TM
-
Interface is suitable to connect to smart
phones, tablet computers or laptops.
Based on iID
®
SPC functionality, scripts can be used for definition of LED, buzzer and button support as well
as
communication functionalities as RF, USB and Bluetooth™.
iID
®
PENsolid is a battery powered device, which can be recharged using the micro USB interface. Battery
cycles may vary from some hours to several days depending on the device configuration. When the device
is connected via it’s USB interface, the device is powered by USB power.
The device is available in several types supporting HF as well as UHF systems suitable for closed coupling
communication with very small sized up to large RFID transponders. Additionally all devices support TELID
®
sensor transponder applications.
First commissioning
Before using your device the first time, please charge the internal rechargeable battery using included
micro USB cable.
(1) ON/OFF button
(3) rechargeable battery state
LED (orange)
(4) Bluetooth™ state LED (blue)
(2) SCAN-
button
(5)(6) Green and red
operation state LED
Focused
RFID
antenna, main RF
field direction
Micro-USB connector
Hole for hand strap, clip
Touch tip
