MICRO-EPSILON surfaceCONTROL SC2500, Руководство по эксплуатации

Страница: 18 / 42

Page 18
Installation and Assembly
surfaceCONTROL 3D SC2500 / SC2510
5.4 Electrical Connections
5.4.1 Connection Diagram
PC
DefMap3D
3DInspect
LAN-cable
with 2x RJ45
male connector
Table power 19V Cable harness/5 m/
standard
for surfaceCONTROL
Controller sC2500
Sensor SC2500-x
5.4.2 surfaceCONTROL 3D 2500 Sensor
5.4.2.1 General
All connectors of the sensor are located in the connector panel on the rear side.
1 2 3 4
Fig. 11 Rear view of sensor with connectors
1 Ethernet port Camera 1
2 Ethernet port Camera 2
3 Sensor control
4 Power supply
5.4.2.2 Supply Voltage (Power)
Pin Signal Comment
1
2
1
V
+
18 VDC ±33 %
max. current consumption 12.5 A
2 GND 0 V
Fig. 12 Pin assignment connector power port
The cable shield is connected to the connector housing.
A 2-pin LEMO PushPull connector is used on sensor side.
i
Only use the included table power pack for the power supply of the surfaceCONTROL 2500 sensor.