Page 26
Installation
optoNCDT 22xx
Mounting and Dimensions of the Controller
5.4
121.5 (4.78)
4 Mounting
holes
8.6
(.34)
145 (5.71)
With cover
ø5.4 (.21 dia.)
154 (6.06)
173 (6.81)
56 (2.20)
54 (2.13)
28 (1.10)
21.2 (.83)
1 (.04)
0
2 (.08)
37.5 (1.48)
0
19 (.75)
61.5 (2.42)
98 (3.86)
ø
20 (.79 dia.)
Controller
Fig. 12
dimensions with mounting angle,
dimensions in mm (inches), not to scale
The controller is mounted by means of 4 screws
type M4 DIN 84. When mounting the controller keep
the LED displays free for watching.
Where installation space is confined it is also pos-
sible to fasten the controllers 2200 using a DIN rail
adapter fitted on the back panel of the controller.
However, for safety reasons this has to be fitted by
the manufacturer and no one else. If the adapter is
used, particular care must be taken with the laying
of the cables and with the cable holder because an
excessive leverage effect will lead to the adapter
becoming damaged beyond repair.
