MICRO-EPSILON CTVM-1H, Инструкция по эксплуатации

Страница: 27 / 54

thermoMETER CTVideo 25
Designation
+8
… 36 VDC
Power supply
GND Ground (0 V) of power supply
GND Ground (0 V) of internal in- and outputs
AL2 Alarm 2 (Open collector output)
OUT-TC Analog output thermocouple (J or K)
OUT-mV/mA Analog output object temperature (mV or mA)
F1-F3 Functional inputs
GND Ground (0 V)
3V SW BLACK / Power supply Laser (+)
GND GREY / Ground Laser (
–)
ORANGE Temperature probe sensor (NTC)
BLUE Sensor ground
PURPLE Sensor power
YELLOW Detector signal
Opened controller
with terminal connections
Power supply
Please use a separate, stabilized power supply unit with an output voltage of 5
– 28 VDC
which can supply 160 mA. The ripple should be max. 200 mV .
Please use shielded cables only for all power and data lines.
The sensor shield has to be grounded.
CAUTION: Please do never connect a supply voltage to the analog outputs as this will destroy the output!
The CTVideo is not a 2-wire sensor !